Features & Benefits
- Manufactured in Salem, OR, Riverside, CA and Sacramento, CA
- 13″, 17″ & 21″ coverage options (Inquire for other widths)
- 1″ rib height
- 24 & 22 Tru-Gauge™ steel and .032″ aluminum
- Aluminum is recommended within 1000 ft of salt water (not required)
- Zinc Coil (inquire for thicknesses)
- 16 & 20 oz. Copper (Inquire for availability & price)
- 3′ to 60′ panel lengths – notched
1′ to 60′ panel lengths – not notched
(Inquire for longer panels) - Panel options: Striations, Accent Ribs, Flat Pan
- 1:12 minimum pitch recommended (for lower pitches, please inquire)
- Floating clip system: allows for expansion & contraction of panels in longer lengths
- Factory injected Butyl sealant available
- Onsite roll forming available for longer panels
(panel end laps and splices are not recommended) - Concealed fasteners: fasteners cannot leak
DI SEAMER Standard Rental Guidelines: click here
• 180 degree seams are not considered an architectural detail. The detail improves the weather tightness and wind uplift capabilities of the panel system, but will show stress and waviness in the seam. The detail is recommended for slopes less than 3/12, roof areas not easily viewed from the ground, and for high wind areas. For additional information, contact a TMP representative and DI Seamers for support and information about the proper use of seaming tools.
QUALITY ROOF SEAMERS Rental Prices: click here
• 180 degree seams are not considered an architectural detail. The detail improves the weather tightness and wind uplift capabilities of the panel system, but will show stress and waviness in the seam. The detail is recommended for slopes less than 3/12, roof areas not easily viewed from the ground, and for high wind areas. For additional information, contact a TMP representative and Quality Roof Seamers for support and information about the proper use of seaming tools.